How to configure a fuel level sensor without a service visit: remote access through NAVTELECOM trackers in the Escort Configurator. Use cases, instructions, and supported platforms.
Why Remote Configuration Was Needed
Previously, configuring or diagnosing a sensor required connecting to it via Bluetooth or a wired connection directly on the vehicle. Even a simple change to the filtering level or a settings check meant a technician had to visit the vehicle.
This was especially inconvenient when the vehicle was 400–500 km away or there was no service specialist available. We have now made it possible to perform the same operations through a NAVTELECOM tracker installed on the vehicle, without travelling to it.
How It Works
NAVTELECOM provides a remote configuration service for its trackers. It lets you connect to a specific tracker, which then communicates with the sensors over Bluetooth or via the wired RS-485 interface. This makes it possible to configure sensors and retrieve their current data.
We have integrated the service into the familiar Escort Configurator interface. A remote connection looks the same as connecting directly to a sensor over Bluetooth or by wire, so there is no new workflow to learn. Commands follow this path: Configurator → NAVTELECOM tracker → sensor.
What You Can Do Remotely
You can perform any operation available in the Configurator when connected directly to a sensor:
View current data: fuel level, serial number, and firmware version.
Change any settings, including the filtering level.
Enter the “full” and “empty” calibration values manually.
Download black box data for a period of up to 30 days.
The sensor still needs to be installed and initially configured on site. Remote configuration is designed for ongoing service and maintenance.
Remote Access Use Cases
This integration saves the time and resources previously spent on service visits. Here are some typical issues customers bring to technical support that would once have required a technician to travel to the vehicle.
Irregular fuel level readings
A customer sees fluctuations in the fuel level graph while the vehicle is moving. The cause is often the filtering setting: a tractor may still be using the default level of 5, although we recommend level 10 for this type of vehicle. Previously, someone had to travel to the vehicle—sometimes 400–500 km—to change it. Now the filtering level can be adjusted remotely while the vehicle is operating and online.
Data recorded while offline
If a vehicle operates outside network coverage for a while, the sensor’s black box can be downloaded remotely once the connection is restored. There is no need to travel to the vehicle to retrieve the data.
Diagnosing a sensor error
The monitoring system reports an error or unusual readings. The integrator connects to the sensor through the tracker and immediately checks its settings and current raw fuel level reading. The cause can be identified without a service visit.
Checking for tampering
A driver may learn the sensor password—or the sensor may have no password set—and change its settings. If the integrator notices that the sensor is behaving incorrectly in the monitoring system, they can remotely compare its current settings with the values recorded by the installer and restore the correct ones.
How to Connect
In the Configurator, open “NAVTELECOM Tracker Configuration” and select a connection method based on your monitoring platform.